Fiberglass and Composite Pipe: The Strong, Light Alternative
If you're in the market for fiberglass or composite pipe, look no further than DistributedNOW. Our fiberglass and composite pipe offer many benefits, including a smooth interior surface that is 50% more flow efficient than the equivalent metallic pipe, which reduces paraffin and scale build-up. It’s also only 25% the weight, which means rapid installation using fewer workers and minimal heavy equipment. For more information on our fiberglass and composite pipe, contact us today.
Fiberglass Line Pipe
Our fiberglass line pipe resists corrosion from CO₂, H₂S, and salt water. It’s ideal for low- to medium-pressure applications, transporting highly corrosive gas and produced water:
- Flow/Emulsion Lines
- Injection/Disposal Lines
- Group Lines
- Gas Gathering & Transport Lines
- De-watering Lines
- Water/Frac Water Transfer Lines
Specifications
| Standards / Material Grades | ASTM D2992 Procedure B, API 15HR, anhydride, aliphatic amine and aromatic amine cured epoxy resin |
|---|---|
| Sizes | 2 in. NPS – 12 in. NPS |
| Pressure Rating | Up to 3,500 psi, depending on size |
| Temperature Rating | Up to 212° F (100° C) |
| End Connections | Threaded |
Downloads
| TS&M Fiberglass Piping Systems Flyer - Canada |  |
|---|---|
| TS&M Fiberglass Piping Systems Flyer - U.S. | |
Our Suppliers
Fiberglass Spoolable Line Pipe
Our spoolable fiberglass pipe is offered on reels in continuous lengths up to 9,000 ft. (2740 m). This product provides excellent performance in a variety of applications:
- Flow/Emulsion lines
- Injection/Disposal lines
- Group lines
- Gas gathering & transport lines
- Polymer injection/flow lines
- De-watering lines
- Natural gas production
- High-pressure CO₂ and salt water injection
- Crude oil, salt water & H₂S
- Light chemicals (salts, solvents, pH 2-13 solutions)
Specifications
| Standards / Material Grades | API RP 15S, CSA Z662 |
|---|---|
| Construction | Continuous single-angle filament wound with anhydride cured epoxy structure and exterior jacket layer |
| Sizes | 2 in. NPS – 6 in. NPS |
| Pressure Rating | 750 psi to 3,500 psi |
| Temperature Rating | -29° F to 209° F (-34° C to 95° C) |
| End Connections | Compression slip connectors |
Downloads
| TS&M Fiberglass Piping Systems Flyer - Canada | |
|---|---|
| TS&M Fiberglass Piping Systems Flyer - U.S. | |
Our Suppliers
Fiberglass Tubing & Casing
Our fiberglass products are flow-efficient, lightweight and highly corrosion resistant – perfect for your injection, production and casing string applications:
- Disposal/Injection Tubing
- Production Tubing (ESP, Gas Lift, Rod Pump, PCP)
- Cement Stingers
- Tail Strings
- Casing Liners
- Chemical Waste Disposal
- Geothermal
- Slotted Production Liners & Prepacked Screens
- Observation Well Casing
- Open Hole Liners
Specifications
| Standards / Material Grades | Anhydride, aliphatic amine and aromatic amine cured epoxy resin |
|---|---|
| Sizes | 1.5 in. NPS – 9.625 in. NPS, depending on product |
| Lengths | Joints 28 ft. – 33 ft. (8,5 m – 10,1 m), depending on product |
| Pressure Rating | Up to 4,000 psi, depending on product |
| Temperature Rating | Up to 212° F (100° C), depending on product |
| End Connections | API 5B threaded, threaded & coupled, integral joint |
Downloads
| TS&M Fiberglass Piping Systems Flyer - Canada | |
|---|---|
| TS&M Fiberglass Piping Systems Flyer - U.S. | |
Our Suppliers
Fiberglass Facility Piping
Our fiberglass facility piping is both flow-efficient and cost-efficient, with better chemical resistance and temperature tolerance than PVC and CPVC piping. This product works well for a wide range of applications:
- Low-Pressure Battery & Facility Piping
- Vapor Recovery Lines
- Vent Lines
- Flare Lines
- Tank Internals
- Water Handling (Frac, Processing, Transfer, Cooling Lines, Brine, Brackish)
- Condensate Return
- Industrial Wastewater
- CO₂ Service
- Chemical Process Piping
Specifications
| Standards / Material Grades | ASTM D2310, D2996, API 15LR, aromatic amine cured epoxy resin |
|---|---|
| Sizes | 2 in. NPS – 42 in. NPS (50 mm – 1050 mm), depending on product |
| Lengths | Up to 40 ft. (12 m) random lengths, depending on product |
| Pressure Rating | Up to 450 psig, depending on pipe size |
| Temperature Rating | Up to 210° F (99° C) |
| End Connections | Taper bell & spigot, socket joint, threaded & bonded |
Downloads
| TS&M Fiberglass Piping Systems Flyer - Canada | |
|---|---|
| TS&M Fiberglass Piping Systems Flyer - U.S. | |
Our Suppliers
Fiberglass Spool Fabrication
In-house fabrication of fiberglass assemblies (spools) is available upon request:
- Risers
- Tank internals
- Complete VRU systems
- Custom pup joints
- Custom spools
Downloads
| TS&M Fiberglass Piping Systems Flyer - Canada | |
|---|---|
| TS&M Fiberglass Piping Systems Flyer - U.S. | |
Fiberglass Line Pipe Supervision Services
With over 35 years of experience selling fiberglass products, we have the technical expertise to meet your requirements. Our field supervisors have solid industry experience and are qualified by the manufacturer to provide these services:
- Supervision of installation procedures
- Product training certifications
- Available 24 hours/day
Downloads
| TS&M Fiberglass Piping Systems Flyer - Canada | |
|---|---|
| TS&M Fiberglass Piping Systems Flyer - U.S. | |